Single-leaf steel fire-rated door EI30/EI60

The single-leaf steel fire-rated door EI30/EI60 is a certified steel door with fire-resistant infill and seals. It separates rooms where a building has to hold back the spread of fire and smoke, and its hardware is put together to order in the configurator.

Construction

• Door thickness: 63 mm.
• Steel sheet thickness: 1.5 mm.
• Infill: Paroc PAL 120 stone wool.
• Finish: powder coating.

What the EI rating means

The EI rating shows how many minutes the door keeps two properties in a fire. E stands for integrity: the door does not let flames and hot gases through. I stands for insulation: the door limits how much the surface on the other side heats up. In the configurator you can choose EI30, EI60 or EI120, which means 30, 60 or 120 minutes respectively.

Options in the configurator

• Lock: BMH 1000, a Panic lock that opens from the inside without a key, an emergency exit lock or an electric strike for remote release.
• Threshold: 5x20, 25x40 or a drop-down threshold that lowers when the door closes.
• Trim strips: optional.

Where it is used

Single-leaf fire doors are used in stairwells, plant and boiler rooms, warehouses, garages and between fire compartments of office and commercial buildings. The required EI rating is set by the building design and the fire safety requirements for the specific room. If you need a wider opening, the same series also includes one-and-a-half-leaf and double-leaf models.